Vitek VT-H41 Guia do Utilizador descarregar pdf (Página 53)

VT-H41



6-6. SYSTEM

DESCRIPTION Press SEL to see system information.

DATE FORMAT Select the preferred date and time display.

SET DATE & TIME Set the present date and time. If DLS function is ON, user can

not enter into this menu and change data and time.

DLS Set DLS (Daylight Saving).

ADMIN PASSWORD Set the password for the administrator. The default password is

1111.

NETWORK PASSWORD Set the password of network client. The default password is

1111.

LANGUAGE Select a language.

LOAD DEFAULT Choose OFF or ON. If selecting ON, press the SEL button to load

defaults.

LOAD FACTORY

DEFAULT

Select ON to reset the system to the factory default settings.

SAVE SETUP TO A USB User can save the current menu setting value to the USB memory

stick.

LOAD SETUP FROM A

USB

User can upload the menu setting value of DVR to another DVR

using the USB Memory stick.

USB UPGRADE The firmware of DVR can be upgraded through USB port

DESCRIPTION – Select DESCRIPTION using buttons and press SEL button.

MAIN BOARD VERSION: Displays the version of the system main board.

FIRMWARE VERSION: Displays the version of the system firmware.

STORAGE SIZE: Displays the capacity of the HDD.

IP ADDRESS: Displays the IP address of the DVR.

MAC ADDRESS: Displays the MAC address of the DVR.

DATE FORMAT – Refer to “2-3. Time setting”

SET DATE & TIME – Refer to “2-3. Time setting”

DLS – Refer to “2-4. DLS (Day Light Saving) time setting”.

ADMIN PASSWORD – Select ADMIN PASSWORD using buttons and press SEL button.

Then the ADMIN PASSWORD screen is displayed.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 75 76

Sem comentários

Vitek VT-H41 Guia do Utilizador Página 53