Vitek VT-H41 Guia do Utilizador descarregar pdf (Página 72)

VT-H41



Connect to the system, using an Router or ADSL modem and an Ethernet cable (10BASE-

T/100BASE-TX CAT 5 LAN cable)

1. Go to SETUP>NETWORK. Set NETWORK TYPE as DHCP and DDNS SERVER as ON. And make

sure that DDNS SERVER NAME is vitekddns1.com

2. Go to Setup menu of Router and open TCP port 5445 using Port Forwarding. (Refer to A.

How to set IP address of the DVR and open TCP port of the router?)

3. Confirm the Mac address and Serial No. from the label of the rear panel of the DVR.

4. Open the web browser and log on to http://www.vitekddns1.com

 MAC Address: Input the Mac address (EX. 0002690XXXXX) without a space.

 Serial Number: Input the Serial No. (EX. 43000700XXX) without a space.

 Domain Name: Input Domain Name for your DVR system (Note. Input only Domain

Name and never input “vitekddns1.com”.)

5. Click the DUPLICATION CHECK button to see if the domain name is available.

6. If you see the screen “You can use the Domain name you entered” then click RETURN and

click REGISTER button to complete the registration.

7. Run the pre-install the network client software on the supplied CD. (Refer to Chapter 6.

Network access using the Exclusive network viewer)

8. Click button and add the DVR as necessary.

1 2 ... 67 68 69 70 71 72 73 74 75 76

Sem comentários

Vitek VT-H41 Guia do Utilizador Página 72