Vitek VTC-IR302FN Especificações descarregar pdf (Página 55)

ENVI Series: VTC-IR302FN

14.3.1. Rate Control Mode

14.3.2. Image Quality Setup

In Image Quality level setup, select “Low Compression” for higher image quality, but it requires

higher network bandwidth. Selecting the “Lowest” requires lower network bandwidth, but gives

decreased image quality.

After configuration is finished, click Apply button to save the setting. If you click Default button,

the entire configuration will be reset to the original values.

Motion Detection

 Motion Detection: (this is only available in Primary Stream) If enabled, Motion Detection

feature is activated and user can configure the areas where motion detection function will work.

Click Check All button for whole scene to be active (grid will turn Green) then click on any box

inside scene to take out that area from Motion Detection (box will turn Red) then click Apply to

save

 Motion Sensitivity: Set the sensitivity of motion defined in Motion Detection Area. Select

between -100 and 100. 100 is the most sensitive.

After all the settings are done, click Apply button to save it. If Default button is clicked, all the

fields return back to original value.

14.4. Camera Control (Select Models)

Select Camera Control on the bottom of Camera & Motion Configuration menu.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 192 193

Sem comentários

Vitek VTC-IR302FN Especificações Página 55